The centrifugal extractor is very effective for the treatment of chemical phenolic wastewater. If the processing volume is about 5 cubic meters per hour, you can choose the CWL350-M centrifugal extractor, which has a mixed flux of 1-8 cubic meters per hour.
Phenolic wastewater treatment refers to the treatment of a type of wastewater containing phenolic substances. If this type of wastewater is not treated and discharged directly, it will cause great harm, so it needs to be purified to within the discharge standard. The sources of phenolic wastewater are very wide and there are many types. For example, coking plants, gas plants, gas generating stations, dye plants, pesticide plants and other industrial production processes will produce phenolic wastewater of different properties. The difficulty of treating these wastewaters is different, but the overall process principle is roughly the same.
Basic Parameters of Phenol-containing Wastewater
- Total treatment capacity: 5m³/h
- Phenol content in raw water: total phenol about 1700mg/L
- Phenol content in effluent: volatile phenol content <200mg/L
Extraction Equipment Selection
Extraction section: 2 sets CWL350-M centrifugal extractors, the pre-treated wastewater and high-efficiency extractant are quantitatively sent to the centrifugal extractor through the pump and flow meter to complete the dephenolization.
Stripping section: 2 sets CWL350-M centrifugal extractors, alkali solution is used to strip the phenol-containing load to regenerate the extractant, and the dephenolized wastewater enters the next section.
Extraction Equipment Technical Features
- As an extraction equipment, the centrifugal extractor occupies a small area, has low energy consumption, high extraction and stripping efficiency, small amount of extractant, and simple equipment operation and maintenance.
- Automatic control, good reliability, and low maintenance workload ensure the safety of operators and equipment.
CWL-M Centrifugal Extractor Introduction
CWL-M centrifugal extractor is a new, efficient and energy-saving liquid-liquid extraction and separation equipment developed and produced by Zhengzhou Tiei Extraction Technology. It is mainly used in the extraction, stripping, separation and washing of two-phase liquids. The working principle of the centrifugal extractor is essentially different from that of traditional extraction equipment. It relies on centrifugal force to quickly mix and separate two-phase liquids. CWL-M centrifugal extractor has been widely used in chemical pharmaceuticals, phosphorus chemical industry, environmental protection, hydrometallurgy, petrochemical industry, fine chemical industry and other fields.
The centrifugal extractor has good effect and low comprehensive cost in treating chemical phenol wastewater, which can meet the different production needs of customers. For more information about the extraction treatment process and equipment of phenol-containing wastewater, welcome contact us.
Email: sales@tieiextraction.com
Whatspp: +86 19069612820
