DMF extraction reactor technical transformation. Previously, the equipment used to extract DMF from wastewater was a reactor, but many problems occurred during the operation, such as complicated operation process, time-consuming, poor extraction effect, etc., which could not be solved. At present, according to production requirements, the reactor is being technically transformed and replaced by the centrifugal extractor.

DMF is a colorless, transparent liquid with strong polarity. It is miscible with water, ether, ketone, ester, unsaturated hydrocarbons and aromatic hydrocarbons. It is known as the "universal solvent" and is widely used in petrochemical, organic synthesis, inorganic chemical, pesticide, pharmaceutical and other fields.

There are several methods for extracting DMF from wastewater. The most commonly used method is extraction, which is the solvent extraction process. Using the CWL-M centrifugal extractor and selecting the appropriate extractant can greatly increase the recovery rate of DMF and reduce the pressure of the subsequent processing section. Experimental data show that the centrifugal extractor has a good effect in extracting DMF and a high extraction rate. It can effectively solve some existing problems and can be put into industrial production.

For the technical transformation of the reactor, the customer provides the existing process flow and the problems, as well as the desired effect. Then Tiei Extraction's technical engineers will develop corresponding technical support plans based on the customer's specific situation, and conduct small-scale tests for the customer before purchasing industrial equipment. Subsequent plans will be implemented only after the experimental data meets the customer's requirements.

The advantages of replacing the DMF extraction reactor with the Centrifugal Extractor are obvious. If you also have a reactor technical transformation project that needs consultation, welcome contact us.
Email: sales@tieiextraction.com
Whatsapp: +86 19069612820